@ahudson the following link is the hardware files. Please download this file -> DOWNLOAD <- and set your directory path as the folder labeled Step_2_Addons.
To change your directory you have to locate it using the preference tab.
File > Preferences > Sketchbook location: C:\Users\username\Documents\Arduino.
The above should be changed to Step_2_Addons.
For reference please use Lesson 1C.
If this does not work, please try deleting files located in: C:$Username\AppData\Local\Arduino15\staging
Then try checking if it works again.
Thanks for your questions!
CoDrone is equipped with an accelerometer, barometer, optical flow sensor, and more. It can be programmed to fly autonomously or with remote control. However, the front IR transmitter and receiver on the CoDrone can only send and receive messages and will not detect obstacles. For autonomous flight, you can program a flight pattern in our Snap! block program, Arduino, or Python. There is an optical flow sensor onboard that you can use to estimate position and displacement from the origin. As for the battery, flight time is limited to keep the drone small and lightweight. If you want to upgrade, we currently do not offer support for adding extra sensors but here are some links that may be helpful on the technical specifications:
This lesson briefly goes over all of the components and assembling CoDrone Pro
For technical specifications on the SmartInventor Board and Bluetooth communication, check this documentation site
Here is a function guide with code examples for requesting sensor data
If the above links did not answer any your questions you may refer to ByRobot's documentation
Let me know if you have any more questions!
Looks like your connection to Robolink community was lost, please wait while we try to reconnect.