Hi @jimmy-adkins , I just wanted to follow up with you about your issue. If you could reply to the form I linked above we can send you the return label for the old RaspberryPi and send you a new one. Thanks!

@meutenbeute I apologize for the delay, your message seems to have gotten lost in the inbox. Blockly will be coming out very soon! Keep checking for updates and you will see Blockly before the end of this month.

@pytluvsu I apologize, I see that you are trying to use Zumi with Python. There is no need to install anything for Zumi. You can get started by turning on Zumi and following the instructions on her screen. Let me know if you have any more questions on getting started!

@brennsteph To answer your questions I think it would be best to schedule a support call at this link I can assist you with the KNN lesson and training colors with previous data. Code Mode will be up within this month!

@indrajaal Awesome! Thanks for the update.

@joanappardal Thanks for the feedback and ideas!

@avizipi For driving in a loop, go_straight() is the function that you want to use. For reverse, use go_reverse(). Documentation can be found here

@avizipi If you are connected to the internet, you can run the following command in a Jupyter Notebook cell to get the IP address: !hostname -I Hope this helps!

@dean Please open a new Jupyter Notebook using the zumidashboard.ai:5555. Make sure that you are connected to the same network you were connected to last. In a new cell, add the following command and run: !sudo pip3 install zumidashboard --upgrade If you see an error, restart Zumi and try again. Let me know if this solves your issue!

Hi @dbergman, Just following up with you on your connection issue. I will be sending you an email to further discuss with you since I may need to walk you through a manual update.

@brianchilders That's great to hear! Thank you for letting us know, and if you have any questions, you can always post in the forum.

@jalakoo My only concern would maybe be that some of the dependencies might need to be updated or may not work with that version. I don't know of any bugs yet but let us know if you find any with buster!

@jalakoo Code mode is in progress! It cannot be enabled just yet.

@jetforme If you are having trouble getting online, you can update your Zumi version manually.Here are the instructions for uploading the new SD card image. Thank you for waiting!

@maddness If you are having trouble getting online, you can update your Zumi version manually. Here are the instructions for uploading the new SD card image. Thank you for waiting!

@sbanas If you are having trouble getting online, you can update your Zumi version manually. Here are the instructions for uploading the new SD card image. Thank you for waiting!

@ariandavery If you are having trouble getting online, you can update your Zumi version manually.Here are the instructions for uploading the new SD card image. Thank you for waiting!