Thank you Whoseop and Wes! I appreciate your time and patience. I'm certain the students in our GenCyber kids camp will love the drones. Thanks again.
johnnycurry
@johnnycurry
Posts made by johnnycurry
-
RE: CoDrone Pro No Remote Control Sync, No Communication with Mac
-
RE: CoDrone Pro No Remote Control Sync, No Communication with Mac
This may also be of some use - When attempting to update firmware I receive the following after trying both WiFi and USB connections:
-
RE: CoDrone Pro No Remote Control Sync, No Communication with Mac
Making progress but not quite there. Error message after applying and attempting to upload your last code:
Arduino: 1.8.5 (Mac OS X), Board: "Rokit-SmartInventor-mega32_v2"Sketch uses 10542 bytes (32%) of program storage space. Maximum is 32336 bytes.
Global variables use 1141 bytes of dynamic memory.
avrdude: stk500_recv(): programmer is not responding
avrdude: stk500_getsync() attempt 1 of 10: not in sync: resp=0x00
avrdude: stk500_recv(): programmer is not responding
avrdude: stk500_getsync() attempt 2 of 10: not in sync: resp=0x00
avrdude: stk500_recv(): programmer is not responding
avrdude: stk500_getsync() attempt 3 of 10: not in sync: resp=0x00
avrdude: stk500_recv(): programmer is not responding
avrdude: stk500_getsync() attempt 4 of 10: not in sync: resp=0x00
avrdude: stk500_recv(): programmer is not responding
avrdude: stk500_getsync() attempt 5 of 10: not in sync: resp=0x00
avrdude: stk500_recv(): programmer is not responding
avrdude: stk500_getsync() attempt 6 of 10: not in sync: resp=0x00
avrdude: stk500_recv(): programmer is not responding
avrdude: stk500_getsync() attempt 7 of 10: not in sync: resp=0x00
avrdude: stk500_recv(): programmer is not responding
avrdude: stk500_getsync() attempt 8 of 10: not in sync: resp=0x00
avrdude: stk500_recv(): programmer is not responding
avrdude: stk500_getsync() attempt 9 of 10: not in sync: resp=0x00
avrdude: stk500_recv(): programmer is not responding
avrdude: stk500_getsync() attempt 10 of 10: not in sync: resp=0x00
Problem uploading to board. See http://www.arduino.cc/en/Guide/Troubleshooting#upload for suggestions.This report would have more information with
"Show verbose output during compilation"
option enabled in File -> Preferences. -
RE: CoDrone Pro No Remote Control Sync, No Communication with Mac
Attempted the first part of your message and received this error message:
Arduino: 1.8.5 (Mac OS X), Board: "Rokit-SmartInventor-mega32_v2"Archiving built core (caching) in: /var/folders/7f/lyldq5pj3q39vrtlxmgt_sdm0000gp/T/arduino_cache_707864/core/core_rokit_avr_SmartInventor-mega32_v2_8372d02330c307e08216049b70f86e76.a
core/core.a(main.cpp.o): In functionmain': /Users/Johnny/Library/Arduino15/packages/rokit/hardware/avr/1.0.3/cores/atmega32/main.cpp:14: undefined reference to
loop'
collect2: error: ld returned 1 exit status
exit status 1
Error compiling for board Rokit-SmartInventor-mega32_v2.This report would have more information with
"Show verbose output during compilation"
option enabled in File -> Preferences. -
RE: CoDrone Pro No Remote Control Sync, No Communication with Mac
Wondering if @robolink_arnold was able to take a look at my situation. Thank you in advance for your response.
-
RE: CoDrone Pro No Remote Control Sync, No Communication with Mac
Certainly. The only reason I'm attempting to load this code is in effort to make the drone connect to the remote control (gathered code after reading/researching). I watch videos and they all make it look so easy - turn on the remote on, turn the drone on, wait, and it's paired. Not so much on this one:
#include <CoDrone.h> void setup() { CoDrone.begin(115200); CoDrone.PrintDroneAddress(); #include<CoDrone.h> void setup() CoDrone.begin(115200); byte droneAddress[6] = {0xEC, 0x3F, 0xE5, 0xC2, 0xB5, 0xD0}; //This will be replaced with your CoDrone's unique address CoDrone.pair(droneAddress); } void loop() { }
Thank you for your help. JC
-
RE: CoDrone Pro No Remote Control Sync, No Communication with Mac
Thank you. I am the coordinator to a GenCyber student camp starting Monday and we have 40 of the drones for students. I need this to connect/sync to the remote.
-
RE: CoDrone Pro No Remote Control Sync, No Communication with Mac
Thank you Wes for replying. After plugging-in USB and changing the set to "Rocket-SmartInventor-mega32_v2, then verifying I received this message: Arduino: 1.8.5 (Mac OS X), Board: "Rokit-SmartInventor-mega32_v2"
In file included from /Users/Johnny/Documents/Arduino/sketch_jun19a/sketch_jun19a.ino:6:0:
/Users/Johnny/Documents/Arduino/libraries/CoDrone/CoDrone.h: In function 'void setup()':
/Users/Johnny/Documents/Arduino/libraries/CoDrone/CoDrone.h:1158:21: error: type mismatch with previous external decl of 'setup()::CoDroneClass CoDrone' [-fpermissive]
extern CoDroneClass CoDrone;
^
In file included from /Users/Johnny/Documents/Arduino/sketch_jun19a/sketch_jun19a.ino:1:0:
/Users/Johnny/Documents/Arduino/libraries/CoDrone/CoDrone.h:1158:21: error: previous external decl of 'CoDroneClass CoDrone' [-fpermissive]
extern CoDroneClass CoDrone;
^
sketch_jun19a:9: error: expected initializer before 'CoDrone'
CoDrone.begin(115200);
^
exit status 1
expected initializer before 'CoDrone'This report would have more information with
"Show verbose output during compilation"
option enabled in File -> Preferences.What do you think?
-
CoDrone Pro No Remote Control Sync, No Communication with Mac
CoDrone Pro won't sync/connect to remote control - Bluetooth board light forever flashes yellow color after pressing reset button, drone flashes green. Attempted USB connection to MacBook Pro, High Sierra, Arduino 1.8.5, upload mode (switch 1 on), receive the following error message: Arduino: 1.8.5 (Mac OS X), Board: "Arduino/Genuino Uno"
/Users/Johnny/Documents/Arduino/sketch_jun19a/sketch_jun19a.ino: In function 'void setup()':
sketch_jun19a:9: error: expected initializer before 'CoDrone'
CoDrone.begin(115200);
^
exit status 1
expected initializer before 'CoDrone'This report would have more information with
"Show verbose output during compilation"
option enabled in File -> Preferences.Using "Arduino/Genuino Uno on /dev/cu.SLAB_USBtoUART port. Only other port option is "Arduino/Genuino Uno on /dev/cu.Bluetooth-Incoming-Port" Neither have success.
Please help in pairing remote to drone.